Mutable Instruments WARPS

CHF 239,00 CHF 239,00

Enthält 7,7% MwSt.
zzgl. Versand

Nicht vorrätig - Join the waitlist to be emailed when this product becomes available

Artikelnummer: sku_8032. Kategorien: , , , . Schlüsselworte: , , . Marke:

Digital cross-modulator, with continuous morphing between modulation algorithms.

Continuous morphing between 7 cross-modulation algorithms: crossfade, cross-folding, digital model of analog diode ring-modulation, digital ring-modulation, bitwise XOR modulation, octaver/comparator, 20-band vocoder.
Control of timbre richness/brightness.
Each audio input has a built-in digital VCA with emulation of analog soft-clipping.
Audio input 1 can be replaced by an internal digital oscillator with through-zero FM. Available waveforms: sine, triangle, sawtooth, pulse, filtered noise.

Modulation algorithm morphing.
Timbre richness.
Input gain/distortion for audio inputs 1 and 2.
Internal oscillator waveform.

Inputs and outputs
Audio input 1 (carrier) level CV (or internal oscillator 1V/Oct CV), -1V to +8V.
Audio input 2 (modulator) level CV, -1V to +8V.
Modulation algorithm morphing CV, -5V to +5V.
Timbre CV, -5V to +5V.
Audio input 1 (or internal oscillator through-zero FM). Modular level expected (up to 15 Vpp).
Audio input 2. Modular level expected (up to 15 Vpp).
Cross-modulated signal output.
Auxiliary output: internal oscillator signal (when enabled) or mix of inputs 1 and 2 (post digital VCA).

Technical characteristics
Input impedances: 100k.
AD/DA: 16-bit, 96kHz.
Internal processing: 32-bit floating point, 576kHz (32kHz for vocoder).
Open-source hardware and firmware.
Easy firmware updates through an audio interface.
Cortex-M4 ARM processor.
Current consumption: +12V: 110mA ; -12V: 5mA.

Evolved from the oscillator mixing section of Mutable Instruments’ desktop hybrid synths, Warps is designed to blend and combine two audio signals. A variety of wave-shaping and cross-modulation methods – some of them emulating classic analog circuits, some of them purely digital – are provided by the module.

With Warps, the cross-modulated sound can be sculpted with control voltages along 4 dimensions: by controlling the amplitude and distorting the input signals, by smoothly scanning through the collection of modulation algorithms, and by adjusting a timbre parameter controlling the brightness/harshness of the modulated signal.

Since many classic cross-modulation effects work best when the carrier is a simple waveform – for example, a sine wave for ring-modulation or a buzzing waveform for vocoding – Warps includes a digital oscillator offering a handful of classic waveforms. This internal oscillator, which tracks V/Oct and supports through-zero FM, will replace the carrier audio input – freeing up one oscillator in your system for other duties!


Es gibt noch keine Bewertungen.