4ms Rotating Clock Divider Kit (RCD Kit)
Build your own Rotating Clock Divider, with the RCD kit.
The Do-it-yourself kit includes all the parts necessary to build a fully-featured RCD. This is a beginner-level kit, but you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).
Divide-by-1 to Divide-by-64, on 8 output jacks
CV Rotate jack to shift divide-by amount on each jack
CV Reset jack to reset/re-sync all jacks
Optional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate/Trigger, Up/Down-counting)
Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
CV Rotate (0V to +5V input)
CV Reset (5V to 15V trigger)
Divided Clock Outputs (8 jacks):
…where R is the CV Rotation.
Selectable Gate/Trigger mode:
Selectable Divide range up to Divide-by-64:
Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more “dance-able” even when using the “weird” clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
The RCD is 4HP and 48mm (1.85″)
+12V rail: __mA
+5V rail: not used
-12V rail: not used