Out of stock

4ms Quad Clock Distributor QCD

CHF 245,00 CHF 245,00

Nicht vorrätig

Artikelnummer: sku_8230 Kategorien: , , Schlagwörter: , , , , Marke:


Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.
With a Tap Tempo button and five sync’ed clock outputs, the QCD is a versatile head-of-the-chain “Master” clock module, and/or a complex rhythmic pattern generator.


Four CV-controlled Clock Divider/Multipliers Tap tempo button and five sync’ed clock outputs make the QCD perfect for head-of-the-chain “Master” clock module Tap clock output runs at the tapped tempo (even if other channels are being clocked externally) Create complex rhythmic patterns by patching multiple channels into each other’s Div/Mult CV and Reset Each of the four channels has an independent clock IN, OUT, Reset and Div/Mult CV Divide or Multiply incoming clock from /32 to x16 on each channel: Detented knob to snap to integer division/multiples CV jack to modulate Div/Mult amount Reset jack (per channel) restarts the clock when a trigger is received (alters phase of clock) Clock input jacks are normalized downwards: Tap->Red->Black->Blue->Green Clock outputs stop automatically when incoming clock stops LEDs blink to output clocks’ tempos 5V clock output pulses, fully buffered. Default is square-wave, and PW is controllable with expander Daisy chain multiple QCDs or other clock modules using Tap Out jack Header on the PCB to connect to Quad Pingable LFO (QPLFO) to provide four CV Skew-able, CV Div/Mult-able envelopes Interfaces with QCD Expander for more features (Pulse Width, Inverted Gate, attenuverters for CV inputs) Module size: The QCD is 10HP and 1.0 inches (26mm) deep. All pots have a metal shaft and nut. Power consumption: A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail. +12V rail: 48mA with jumper selecting external 5V 88mA with jumper selecting internal 5V. +5V rail: 41mA with jumper selecting external 5V not used (0mA) with jumper selecting internal 5V. -12V rail: 40mA

Join the waitlist to be emailed when this product becomes available